Hansen Nut & Hose Tail

PRODUCT DIMENSIONS
Click Here to View

PRODUCT SIZING & PRESSURE RATINGS All threads are tapered
HANSEN CODE	METRIC/IMPERIAL (BSP)	MAX PRESSURE @ 20 Degrees Celsius
SNT15	15mm Nut x 15mm Hose Tail (1/2" Nut x 1/2" Hose Tail)	10 Bar
SNT2015	20mm Nut x 15mm Hose Tail (3/4" Nut x 1/2" Hose Tail)	10 Bar
SNT20	20mm Nut x 20mm Hose Tail (3/4" Nut x 3/4" Hose Tail)	10 Bar
SNT2515	25mm Nut x 15mm Hose Tail (1" Nut x 1/2" Hose Tail)	10 Bar
SNT2520	25mm Nut x 20mm Hose Tail (1" Nut x 3/4" Hose Tail)	10 Bar
SNT25	25mm Nut x 25mm Hose Tail (1" Nut x 1" Hose Tail)	10 Bar
SNT32	32mm Nut x 32mm Hose Tail (1 1/4" Nut x 1 1/4" Hose Tail)	10 Bar
SNT40	40mm Nut x 40mm Hose Tail (1 1/2" Nut x 1 1/2" Hose Tail)	10 Bar
SNT50	50mm Nut x 50mm Hose Tail (2" Nut x 2" Hose Tail)	10 Bar
SNT80	80mm Nut x 80mm Hose Tail (3" Nut x 3 " Hose Tail)	10 Bar

FEATURES & APPLICATIONS

Manufactured from the best materials available. Nuts and Hose Tails Highest Quality Glass Fibre Reinforced Nylon.
Washer Thermoplastic Rubber.
Manufactured from a raw material suitable for use with potable (drinkable) water.
Used for a quick and easy connection to a variety of suction and soft hoses to taps and pumps.
Pressure rating 10 bar (1000kPa. 145 PSI) @) 20°C.
Suitable for many types of fluid. Ask your dealer for details.
All pipe work must be adequately supported.
Use a thread sealant on all threaded connection.
Like all HANSEN fittings it comes with a risk free guarantee.
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.