|
Threaded Pipe Fittings |
|
• |
|
|
|
|
|
|
|
|
• |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
 |
 
|
PRODUCT SIZING & PRESSURE RATINGS
All threads are tapered |
HANSEN CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
MAX PRESSURE
@ 20 Degrees Celsius |
SNTE 20 |
20mm |
3/4" |
10 Bar |
SNTE 25 |
25mm |
1" |
10 Bar |
- Manufactured
from the best materials available. Nuts and
Hose Tails Highest Quality Glass Fibre Reinforced
Nylon.
- Washer
Thermoplastic Rubber.
- Manufactured
from a raw material suitable for use with
potable (drinkable) water.
- Used
for a quick and easy connection to a variety
of suction and soft hoses to taps and pumps.
- Pressure
rating 10 bar (1000kPa. 145 PSI) @) 20°C.
- Suitable
for many types of fluid. Ask your dealer
for details.
- All
pipe work must be adequately
supported.
- Use
a thread
sealant on all threaded connection.
- Like
all HANSEN fittings it comes with a risk
free guarantee.
- Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
|
|
|
|
|
|
| |
|
|
|
|