 |
This
is an accessary washer designed to fit the White
Male Tank Fitting STF(W) above. To go
to Low Density Poly Washer page CLICK
HERE |
 |
This
is an accessary washer designed to fit the BlacK
Male Tank Fitting STF(B) above. To go
to Male Tank Fitting Washer page CLICK
HERE |
 |
These
are accessary nuts designed to fit the Tank Fittings STF(B) & STF(W) above. To
go to Back Nut page CLICK
HERE |
|
PRODUCT
SIZING & PRESSURE RATINGS
All
threads are tapered |
| STFB BLACK FITTING |
HANSEN
CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
MAX
PRESSURE @ 20 Degrees Celsius |
STF15B |
15mm |
1/2" |
16
Bar |
STF20B |
20mm |
3/4" |
16
Bar |
STF25B |
25mm |
1" |
16
Bar |
STF32B |
32mm |
1
1/4" |
16
Bar |
STF40B |
40mm |
1
1/2" |
16
Bar |
STF50B |
50mm |
2" |
16
Bar |
| STFW WHITE FITTING |
HANSEN
CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
MAX
PRESSURE @ 20 Degrees Celsius |
STF15W |
15mm |
1/2" |
16
Bar |
STF20W |
20mm |
3/4" |
16
Bar |
STF25W |
25mm |
1" |
16
Bar |
STF32W |
32mm |
1
1/4 |
16
Bar |
STF40W |
40mm |
1
1/2" |
16
Bar |
STF50W |
50mm |
2" |
16
Bar |
FEATURES & APPLICATIONS |
- Thread
BSPF (Parallel)
- Precision
Heavy Duty Tapered Threads give a Strong
Reliable Seal.
- Manufactured
from a Raw Material Approved For Use With
Potable (drinkable) Water.
- Manufactured
from High Quality Glass Fibre Reinforced
Nylon.
- Weather,
Termite, Fungi & Bacteria Resistant.
- Common
Applications Include Horticultural, Agricultural,
Irrigation, Marine & Plumbing.
- Fire
Rating UL94HB and UV Stabilised.
- All
pipe work must be adequately
supported.
- Use
a thread
sealant on all threaded connection.
- WRAS
approved 6mm to 50mm.
- Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
|
APPROVALS |
|
Approved
in sizes 6mm to 100mm (1/8" to 4") |
 |
Approved
in sizes 6mm to 50mm (1/8" to
2") |
| For
more information on approvals click on
the appropriate logo |
|
|
