|
True Fit Threaded Fittings |
|
• |
|
|
|
|
|
|
|
|
• |
|
|
• |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
|
|
|
|
|
|
|
|
| |
|
|
|
 |
 |
The
SWLR & SWLP are accessory washers designed
to fit the Female Tank Fitting (SFTFT). To go
to the Female Tank Fitting page CLICK
HERE |
|
FEMALE TANK FITTING WASHER
(BLACK RUBBER) PRODUCT SIZING |
HANSEN CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SWLR15 |
15mm |
1/2" |
SWLR20 |
20mm |
3/4" |
SWLR25 |
25mm |
1" |
SWLR32 |
32mm |
1 1/4" |
SWLR40 |
40mm |
1 1/2" |
SWLR50 |
50mm |
2" |
SWLR80 |
80mm |
3" |
SWLR100 |
100mm |
4" |
FEMALE TANK FITTING WASHER
(BLACK POLYETHYLENE) PRODUCT SIZING |
HANSEN CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SWLP15 |
15mm |
1/2" |
SWLP20 |
20mm |
3/4" |
SWLP25 |
25mm |
1" |
SWLP32 |
32mm |
1 1/4" |
SWLP40 |
40mm |
1 1/2" |
SWLP50 |
50mm |
2" |
SWLP80 |
80mm |
3" |
SWLP100 |
100mm |
4" |
FEATURES & APPLICATIONS |
- SWLR Washer
Material; Thermoplastic Rubber
- SWLP Washer Material; Low Density Polyethylene
- All
pipe work must be adequately
supported
- Use
a thread
sealant on all threaded connections
- Used
with Female Tank Fitting - SFTFT and Large
Black Nut - SBNL
- Can
be purchased with SFTFT or as an individual
components
- WRAS
approved 6mm to 100mm
- Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
|
APPROVALS |
|
Approved
in sizes 6mm to 100mm (1/8" to 4") |
 |
Approved
in sizes 6mm to 50mm (1/8" to
2") |
| For
more information on approvals click on
the appropriate logo |
|
|
|
|
|
|
| |
|
|
|
|
