 |
The
washers are accessories washers
to fit the Black Male Tank fitting STF(B)
Link Here |
|
MALE TANK FITTING WASHER
(BLACK RUBBER) PRODUCT
SIZING |
HANSEN
CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SW15B |
15mm |
1/2" |
SW20B |
20mm |
3/4" |
SW25B |
25mm |
1" |
SW32B |
32mm |
1
1/4" |
SW40B |
40mm |
1
1/2" |
SW50B |
50mm |
2" |
MALE TANK FITTING WASHER
(BLACK POLYETHYLENE) PRODUCT SIZING |
HANSEN CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SW15PB |
15mm |
1/2" |
SW20PB |
20mm |
3/4" |
SW25PB |
25mm |
1" |
SW32PB |
32mm |
1 1/4" |
SW40PB |
40mm |
1 1/2" |
SW50PB |
50mm |
2" |
FEATURES & APPLICATIONS |
- Black Rubber Washer
Material; Thermoplastic Rubber
- Black Polyethylene Washer Material; Low Density Polyethyene
- Used
with the Black Male Tank Fitting - STF(B)
- Can
be purchased with Black Male Tank Fitting STF(B) or as individual
components
- WRAS
approved 6mm to 100mm
- Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
|
APPROVALS |
|
Approved
in sizes 6mm to 100mm (1/8" to 4") |
 |
Approved
in sizes 6mm to 50mm (1/8" to
2") |
| For
more information on approvals click on
the appropriate logo |
|
|
