 |
These washers are accessories designed
to fit the White Male Tank Fitting STF(W)
To go to Male Tank Fitting page
Click Here |
|
MALE TANK FITTING WASHER
(WHITE RUBBER) PRODUCT
SIZING |
HANSEN
CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SWR15W |
15mm |
1/2" |
SWR20W |
20mm |
3/4" |
SWR25W |
25mm |
1" |
SWR32W |
32mm |
1
1/4" |
SWR40W |
40mm |
1
1/2" |
SWR50W |
50mm |
2" |
MALE TANK FITTING WASHER
(WHITE POLYETHYLENE) PRODUCT SIZING |
HANSEN CODE |
METRIC
(BSP) |
IMPERIAL
(BSP) |
SW15P |
15mm |
1/2" |
SW20P |
20mm |
3/4" |
SW25P |
25mm |
1" |
SW32P |
32mm |
1 1/4" |
SW40P |
40mm |
1 1/2" |
SW50P |
50mm |
2" |
FEATURES & APPLICATIONS |
- White Rubber Washer
Material; Thermoplastic Rubber
- White Polyethylene Washer Material; Low Density Polyethylene
- Used
with the White Male Tank Fitting - STF(W)
- Can
be purchased with White Male Tank Fitting STF(W) or as an individual
component
- WRAS
approved 6mm to 100mm
- Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.
|
APPROVALS |
|
Approved
in sizes 6mm to 100mm (1/8" to 4") |
 |
Approved
in sizes 6mm to 50mm (1/8" to
2") |
| For
more information on approvals click on
the appropriate logo |
|
|
