 |
TO CHANGE WATER LEVEL
Adjust length of cord at top of float |
| |
| Side Entry Trough |
• |
Thread  Valve into existing trough fitting |
• |
Screw the Nut with cord onto the
Brass arm |
• |
Thread cord through the
float. Tie the cord off to achieve the correct on/off and water level |
|
|
|
 |
| Top Entry Trough |
• |
Thread Valve into existing
trough fitting |
• |
Screw the float onto the brass arm |
• |
Hold the body of the valve at arm
entry point |
• |
Bend brass arm to achieve the
correct on/off and water level.
|
|
|
