Technical Specifications
 
 
 
 
 
 
 
 
 
       
FITTING SIZE
MAX PRESSURE @ 20 Degrees
Celsius
6mm - 50mm
16 Bar (1600 KPA. 235 PSI)
80mm
10 Bar (1000 kPa. 145 PSI)
100mm
10 Bar (1000 kPa. 145 PSI)
 
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.