Find a Stockist near you
Used to convert a Male Buttress Thread on IBC Tank Outlet to a Female BSPT Thread. Comes with standard seal.
Features & Benefits
Fitting sizes 15mm to 50mm Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C.
No, as the high concentration of chlorine used in the water for pools, will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by our limited lifetime warranty.
Yes. For more information on installation tips refer to installation instructions.
Yes, all Hansen manufactured products carry our Limited Lifetime Warranty*
*For more information about the Hansen Limited Lifetime Warranty, please visit the Legal Information link in the footer.
Do not over tighten. The right way to assemble a threaded fitting is hand tight plus one to two turns – no more! For more information on installation tips refer to installation instructions.
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by our limited lifetime warranty.
Use a thread sealant on all threaded connections. We recommend Loctite 5331.