Find a Stockist near you
Hansen Products’ range of Tapping Saddles have revolutionised the way people tee off the main pipeline.
Features and Benefits
Hansen Fast Fit Tapping Saddles Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C.
Hansen does not recommend the use of any Hansen Fast Fit Tapping Saddles under any driveways, paths or foundations
Yes, under normal circumstances one bolt is sufficient but in larger sized saddles there is an additional two holes you can bolt for peace of mind.
The Hansen Fast Fit Tapping Saddle covers this in two ways, firstly the spigot stops the possibility of the saddle moving past the hole in the pipe and secondly with the easy to view custom seal spigots you can see at a glance that the seal is in place.
Yes, because the Hansen Fast Fit Tapping Saddle has a hinge and the bolt is fixed, which means you only need two hands to install the Hansen Fast Fit Tapping Saddle.
The hole saw size information is marked on the Hansen Fast Fit Tapping Saddle body. One easy way to test the size is to test the hole saw fits over the spigot but inside the seal area.
Yes, you will find the Hansen Fast Fit Tapping Saddle easy to install in confined spaces because the hinge opens past 180 degrees without losing the hinged connection.